Make an inquiry

Provide a DETAILED LIST OF VEHICLE DIMENSIONS AND INFORM THE CUSTOMER OF THE RO-RO LOADING RESTRICTIONS, WHICH are BASED on the actual vessel specifications.

Offer

Booking fee
Sea freight: according to the customer’s car height divided into high and low two categories. The high and low compartments are also based on the actual ship, and the dividing line is basically 2 meters 1. Around this size, we need to confirm with the shipowner. Compared to the higher rate, the lower rate will be nearly $10 cheaper.
Dock dues
Down fare: Cargo with trailer port, if there is no automatic departure, can not drive down the trailer, additional down fare.
Towing fee: When loading, if the vehicle is not in driving condition, it needs to be towed into the cabin, and a towing fee will be charged. If there is no power, the horse can be loaded and dragged into the cabin. Note: THERE is no charge for hiring horses, and there is no charge for lifting and lashing the horses. Mafei can undertake major equipment, but is not recommended, because the use of Mafei needs to pay an additional rent.

Collection

1) The vehicle has enough fuel — after arriving at the dock, the vehicle can run for 50 kilometers without stopping for lack of fuel, and ensure that the vehicle can supply fuel normally when going up and down the slope. The north winter weather is cold, diesel car before leaving the factory must add more than -20 or -30 diesel, so as to avoid the diesel low temperature wax block oil road after the vehicle can not start. Ensure that the loading and unloading process will not be stopped due to fuel problems;
2) Ensure that the vehicle is in good condition and can run normally, and ensure that the braking is reliable and the battery can start the vehicle normally;
3) Ensure that the appearance of the vehicle is in good condition when it is delivered to the dock/ship; And ensure the appearance of the vehicle clean. After the vehicle storage port, please remove the rear view mirror put cab or fold well, the vehicle exterior protection work, in the appearance of two to three degrees of protective wax, easy to rust parts such as chassis connectors coated with rust wax to prevent corrosion;
4) In order to ensure the smooth loading of vehicles, maintenance personnel shall provide necessary guidance and assistance to the dock before and during each loading. If defects of vehicles are found, they shall be rectified in time. Our company will not be responsible for the defects of vehicles that fail to be loaded as planned;
5) The reported port information must be accurate and timely, and the port should be as punctual as possible;
6) The inside right of the front windshield of the vehicle should be affixed with the shipping mark in the format of the attachment, and each vehicle and spare parts should be affixed with the shipping mark;
(7), please notify the goods accurately size refers to the vehicle including its annex the largest length, the width and the height of car body outer size) to facilitate loading, and please inform your department contact ground field personnel agency, dozen feet when a third party the company will be with your field personnel to carry out the vehicle size, if the measure size is greater than the size quoted, freight collecting will is based on the amount of data by the scene. The customer shall be responsible for the loss caused by the increase of site size caused by the customer’s misreporting or intentionally concealing the size, resulting in the on-site dumping of goods and additional costs. “Measuring time please customers” and our agency contact to determine;
8) The tool box on the vehicle must be locked with the lock head, and it must be clearly handed over with the vehicle key;
9) Reminder: There can not be any spare parts in addition to the vehicle toolbox, whether separated or attached to the body of the car. Except for the written confirmation obtained from our company in advance. Special request, please send as soon as possible.

Customs declaration

Confirm whether the license and inspection certificate are required in advance.

The bill of lading

Before the bill of lading is confirmed, the customer is required to provide vehicle information: equipment identification number, vehicle chassis number, engine number, etc